Patch Bundle 70

Step-by-Step DTF Pressing Instructions

1. Preparation

1. Lint Roll: Thoroughly roll the pressing area on your garment to remove hair, lint, and loose fibers.

2. Pre-Press: Heat press the blank garment for 3 to 5 seconds at $300^\circ\text{F} - 325^\circ\text{F}$ ($150^\circ\text{C} - 160^\circ\text{C}$). This flattens the area and releases hidden moisture from the fabric.

2. First Press (Bonding)

1. Position the DTF transfer face-up on the garment in your desired spot.

2. Cover the transfer with a sheet of parchment paper or a teflon sheet.

3. Press according to film specifications:

   • Temperature: $300^\circ\text{F} - 325^\circ\text{F}$ ($150^\circ\text{C} - 160^\circ\text{C}$)

   • Pressure: Medium-to-Firm ($40 - 50\text{ PSI}$)

   • Time: 12 to 15 seconds

3. Peeling the Film

• Cold Peel (Standard): Remove the garment from the press and allow it to cool completely to room temperature. Smoothly peel the clear film off starting from one corner.

• Hot Peel (If specified by film manufacturer): Peel the film immediately within 2–3 seconds after pressing while still hot.

4. Second Press (Finishing)

1. Place parchment paper or a teflon sheet over the exposed transfer design.

2. Press a second time for 5 to 8 seconds at the same temperature and pressure.

   • Parchment paper provides a matte, soft-hand finish.

   • Teflon sheet provides a slightly glossy finish.

Garment Care Instructions

• Wait 24 hours before washing the pressed garment.

• Machine wash inside-out in cold or warm water with mild detergent.

• Air dry or tumble dry on low heat.

• Do not use bleach or fabric softeners, and do not iron directly over the print.